EpiValley SXT-4080, Technical Manual

Page: 9 / 18

CDMA FWT SXT-2180
9
Technical Manual
Ⅴ
I. Setting Menu
New Code ‘##41’
- You can change a lock code which is being ‘0000’ as default value.
- After enter a command of ‘##41’, you can heard a lock code sound immediately.
- At this time, You should enter the current lock code to get an authority to change a lock code.
- If the entered current lock code is right, a confirmation tone will be heard.
- After then, You can try to enter new lock code. The processes of an entering new lock code have two steps. First,
you should enter a new lock code and press ‘
À ’ key. And then, you should enter the lock code again to make a double
check and press ‘
À
’.
- If first code and second code was matched, a confirm tone will be heard. Otherwise, the codes are different. You
should do all process again from beginning.
- Press ‘#’ to cancel
Ex) Suppose that the current lock code is ‘7777’, and user wants to change it to ‘8888’.
##41
Î a lock-code prompt sound Î 7777 Î a confirmation tone Î 8888 Î Press
À
Î 8888 Î Press
À
Î a
confirmation tone
Restrict outgoing ‘##42’
- You can restrict outgoing call.
- You can set a restriction by pressing
À
.
- Press ‘#’ to cancel what you did.
Reset phone ‘##43’
- You can reset this terminal to make a default factory value.
- You can reset a terminal by pressing ‘
À ’ and a FWT will be reset.
- Press ‘#’ to cancel what you did.
Voice privacy ‘##44’
- You can set the option of Voice privacy to protect your voice from tapping But It is possible only an operator supports
this feature..
- You can change the option by doing follows.
-
Press ‘
À
’ for changing a current value to ‘Standard’ option
- Press ‘#’ for changing a current value to ‘Enhanced’ option.
NOTE: If you want to change a option of the voice privacy on your conversation, you may press
“
À À
0
À
” for standard mode or “
À À
1
À
” for enhanced mode.
Ex) Suppose a current lock code ‘7777’
##44
Î a lock-code prompt sound Î 7777 Î a confirmation tone Î Press ‘#’ : Enhanced
##44 Î a lock-code prompt sound Î 7777 Î a confirmation tone Î Press
À
: Standard
Auto Gain Control ‘##45’
- You can set AGC which is able to adjust volume level according to the order from BTS..
- After entering a command of ##45,
- Press ‘
À
’ to make it enable
- Or press ‘#’ to make it disable
*Note: User MUST input the security lock code when accessing below menu options.
Input MIN number ‘##*74869#’
- You can set a min number manually,
- Firstly you have to input the SPC code to the six digits correctly, and then it will be change to the input mode for the
min number, if it fail during inputting, maybe you can heard the semi confirm tone and you have to restart again.
- After entering a command of ##46 to six digits
- Press the SPC code to six digits.
- Press ‘580
À ’ to make it enable
- Press the min number to 10 digits.
- Press ‘*0#’ to save it and done.