Installation
20
VGA Broadcaster Lite User Guide
If the red LED does not start flashing, check the source to make sure it is transmitting
an image. Also check the cable(s) between the VGA Broadcaster Lite device and the
source to make sure it is connected correctly.
Network Discovery Utility to Find IP Address of VGA
Broadcaster
You can use the Epiphan Network Discovery Utility on a Windows PC to find the VGA
Broadcaster Lite device and its IP address on the network. You can also use the
Network Discovery Utility to connect to the VGA Broadcaster Lite Web admin
interface.
The VGA Broadcaster Lite device must be assigned an IP address on the network to
be able to transmit visual information, and so that participants can view that
information. It can get an IP address from a DHCP server if there is one on the
network. If the network does not have a DHCP server, see the see the “
If the Network
Does Not Have a DHCP Server
” section. This section assumes that the network has a
DHCP server and that the DHCP server gives the VGA Broadcaster Lite device an IP
address on the network.
To install the Network Discovery Utility
1.
Find the latest Network Discovery Utility on a VGA Broadcaster Lite
download page:
http://www.epiphan.com/products/broadcasting/VGA Broadcaster
Lite/documentation/
Alternatively, you can visit
http://www.epiphan.com/products/broadcasting/VGA
and navigate to find the documentation section
.
2.
Select Download Network Discovery Utility.
Make sure you note the download destination folder.
3.
Run NetworkDiscovery.exe from the destination folder above.
4.
Select Search to find the Epiphan devices connected to the network.