19
16
1
2
EPILASER TREATMENT INSTRUCTIONS
1
1a:
Clean the treatment area. Remove all cosmetics, lotions, and
creams that may block the laser light.
1b:
Dry the treatment area.
Prepare your Skin
Spot Test Instructions
2
Insert the safety key into the laser by sliding it into place until it clicks.
Before your first full treatment, we recommend doing 3 spot tests with the Epilaser on the area(s) you plan to
treat at least 1 day before.
1.
Prepare your skin (see page 19).
2.
Connect the Epilaser to the screen (see page 20).
3.
Follow treatment instructions on pages 20-22 for treatment on one hair (first laser pulse).
4.
Shift the laser over within the treatment area and test with a second laser pulse.
5.
Test up to 3 spots on the area you wish to treat.
6.
Wait 24 hours and examine the tested spots:
If the skin appears normal, you may begin your first treatment.
IMPORTANT:
If you notice blistering, burns, changes in your skin tone, or any other side effects, DO
NOT USE your Epilaser.
If needed, contact your doctor. If you are unsure about the outcome of the test,
do not use your Epilaser and contact EpiladyUSA Customer Support before continuing use.
If your skin tone changes dramatically retest the area.
Insert Safety Key into Laser
NOTE:
Before every treatment check the charge of your Epilaser and screen. If the battery level is low, follow instructions on
pages 17-18 to charge the laser and screen.
NOTE:
If the safety key is not inserted the laser will not operate. Always make
sure the safety key is inserted before continuing to step 3.
If the safety key is not inserted:
You will still see your skin on the screen, but
will not see the white target treatment box, if you attempt to treat a hair
without the safety key inserted into the laser.
SPOT TEST INSTRUCTIONS
