7
28
EPILADY EPILASER INTENDED USE (INDICATIONS)
Your Problem
It’s Possible that...
What you should do
When I put my Epilaser against
my skin, I don’t see anything
on the screen.
The laser is not turned on.
Press the laser button for 2 seconds
until the indicator light at the bottom
of the laser turns green (see page 21).
The charger cable is not
connected properly.
Confirm that the laser is connected to
the screen with the micro-USB cable
supplied with the Epilaser kit.
The clear protective cap is still on
the laser.
Remove the clear cap.
The safety key is not inserted.
Insert the safety key into the laser
(see page 19).
The treatment window isn’t
completely in contact with your
skin.
Make sure that the treatment
window is completely flat against
your skin. Remove clear cap if it is
still on.
The area you’re trying to treat is
too small, curved, or bony to treat.
Try again, pulling the skin flat. If you
can’t get the whole treatment
window to touch the treatment
area, then the Epilaser won’t work
on that area.
The Epilady Epilaser is used to remove unwanted hair. It is an over-the-counter device intended for adjunctive
(combined) use with shaving for sustained hair removal with periodic treatments.
It is also intended for permanent reduction in hair regrowth (defined as long-term, stable reduction in the
number of hairs regrowing) when measured out to 6, 9, and 12 months after the completion of the treatment
regimen.
It is intended for use only on light to medium skin tones (see the Skin Tone Safety Chart on page 1) and
naturally dark hair. The Epilaser will operate, but will not be effective on white, gray, blonde, or red hair.
