3
3a:
If the screen is still connected to the power adaptor, disconnect it at this time.
3b:
Connect the mini-USB end of the charger cable to the laser.
3c:
Connect the other end (micro-USB) to the top of the screen as shown.
Connect Laser to Screen
DO NOT use the Epilaser while the screen is plugged into an
electrical outlet.
3b
4
5
15
20
3c
EPILASER TREATMENT OVERVIEW
Before your First Treatment
Between Treatments
4
Open up the stand and place the screen on the
stand with the power button on the top as shown.
Place Screen on Stand
5
Remove the clear protective cap from the laser.
Remove Clear Cap from Laser
6 weeks before your treatment, do not get a skin peel or other skin resurfacing procedure.
Fully charge the screen and the laser (see pages 17-18).
Perform 3 spot tests on the area you want to treat at least 1 day before treatment (see page 16).
During your First 3 Months
After your first treatment there will be no visible change to the hair. Laser hair removal does not cause
hair to immediately fall out.
The treated hair will eventfully fall out on its own. You may also remove the treated hair with tweezers
after treatment, if desired.
With additional treatments there will be a gradual reduction in the number of hairs. The hair that does
regrow will also begin to lighten and become finer.
After your First 3 Months
Hair follicles that have been deactivated by the Epilaser will not grow back.
Perform occasional touch-ups or additional treatments if necessary.
For best results, treat every 2 weeks for 3 months
or until you are satisfied with the amount of hair reduction.
Continue your normal hair removal routine (e.g., epilation, waxing, shaving) since the laser treatment does
not remove the hair immediately. This will not interfere with the laser’s functionality between treatments.
