4
ASSEMBLY
To hire an authorized technician to assemble the exercise cycle, call toll-free 1-800-445-2480.
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench .
Use the drawings below to identify the small parts used in assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST on page 18. The number after the parentheses is the
quantity needed for assembly. Note: Some small parts may have been preattached for shipping. If a part is
not in the parts bag, check to see if it has been preassembled.
M8 Split Washer
(55)–18
M8 Nylon
Locknut (63)–4
M4 x 16mm Screw
(57)–5
M8 x 25mm Patch Screw
(59)–4
M8 x 40mm Button Screw
(54)–12
1. Identify the Front Stabilizer (15). While another person
lifts the front of the Frame (1), attach the Front
Stabilizer to the Frame with four M8 x 40mm Button
Screws (54) and four M8 Split Washers (55).
15
1
55
55
54
54
1
