EPAK DSi13Ku Pro, Installation And User Manual

Page: 8 / 32

Vessel Management Router
•
Network monitoring & control
•
Traffic prioritization
•
Hotspot management
•
Managing Crew calling services
•
Web Filtering
PBX equipment Handling SIP service for making low cost Voip calls
IP Telephones For making VoIP calls
UPS Online UPS system
Cables 2x Double shielded coax cable (ECOFLEX10 or 15) with N-Plugs
2x Double shielded coax cable (RG6) with F and TNC-plugs
4 Installation Procedure
The installation of our systems is easy compared to existing VSAT systems. This section gives a guideline
and answers all your questions on how and where to install the ODU and IDU. It is highly recommended to
plan your installation according to this in-order to prevent mistakes and damages to the vessel or the VSAT
system.
4.1 Tools required for Installation
Following tools are required for installation.
electric drill; screwdriver 4 mm and 8.5-9 mm drills Hexagon socket screw
key size 6
size 13 screw wrench
4.2 Select Antenna location
The antenna's selected mounting position should have the following characteristics.
4.2.1 Free line-of-sight towards satellite
The antenna needs a free line-of-sight to the satellite for uninterrupted operation. Any obstacles can reduce
service availability and tracking performance. Please note that the free line-of-sight depends on the vessel
geolocation and the selected satellite. The best location for the antenna is on a raised platform or on one
end of the vessel as shown in Figure below.
4.2.2 Mounting surface requirements
The pedestal/mast must be rigid enough to carry the antenna's weight as well as eliminating the vibrations
of the antenna/vessel while tracking/being on the move.
Doc ID 0304 03.07.20
Page 8/32