EPAK Basic Line Series, Manual

Page: 24 / 34

Display Problem Remedy
<Short!>
There is a short in the
connection between Control
Box and antenna Check cable connection to antenna and rotary
joint inside the antenna
complete
The search for a stored
satellite was successful, but
no picture is shown
-
Deactivate Fastscan mode
-
Delete satellite storage positions and
memorize again
Sat
X interchanging with
no Sig
No reception of the stored
satellite
-
Check if superstructures (e.g. steeple cab)
obstruct the sight to the satellite
- if so, move the boat about 3°
-
Reception can be briefly interrupted by
passing boats
scanning
interchanging
with
complete
No receptable satellite in
the entire search range
-
Select other program on the receiver
and search again.
-
Check, if any superstructures are obstructing
the sight to the satellite
-
Check, by using footprint cards (e.g.
www.satcodx.com), whether the boat is inside
the coverage area (footprint)
update reco
It is recommended to
update the saved satellite
data - Do an update of the satellite data. See chapter
5.2.
Cannot find a satellite
-
Check, if superstructures obstruct the view to
the satellite, and restart the search mode
Cannot find a stored
satellite
-
Check, if superstructures obstruct the view to
the satellite
-
Delete the stored satellite and restart the
search mode
Search for stored satellite
takes longer, even though
there are no obstructions in
the view to the satellite - Modify angles of the satellite at the new
location with the function
Upd Sat , see
chapter 5.2.
English Page 24 / 34