EPAK Basic Line Series, Manual

Page: 21 / 34

6.3. Fastscan function (US only)
The tracking system works faster with the Fastscan function. However, if the antenna is locked to a
satellite and the TV does not show a picture, the Fastscan function can be deactivated by following these
steps:
1. Press

repeatedly until the display shows
Setup
(flashing), then press

. Enter password, see
chapter 3.4. If the password is correct you are in the Setup menu with
Tracking
on the display.
2. Press

repeatedly until
FastScan
appears.
Press

to confirm.
3. Press

t
o switch from
On
to
Off
, and confirm with

.
4. The display now returns to
FastScan
. Press

until
quit
appears and confirm with

. The display
shows Setup (flashing).
Now you are back in the main menu and can switch to other satellites or make adjustments in the Setup
menu by pressing the

key.
7. APPENDICES
7.1. Maintenance
The satellite tracking system EPAK-TV is easy to maintain. The following instructions are sufficient to
sustain an optimal capacity of the antenna unit:
• Clean the radome once a month using fresh water and a mild detergent to remove dirt and salt deposits.
• Do not detach the radome!
• Do not spray directly on the radome with high pressure water from a hose!
• Check cable connections to be tight and free of corrosion. Clean the cables regularly.
!! The radome has a protective layer of UV-stabilized and maritime climate-proof lacquer. Do not apply
any additional paint, wax, preservative, solvent, chemicals, or adhesive labels. Do not use alcohol or
dilution or similar products to clean the radome. Any kind of coating will void warranty claims!
In
case any solvent comes in contact with the radome by accident, rinse the area immediately with water
and, if necessary, with a mild detergent!
!! A guarantee for UV and colour stability as well as fracture strength can only be given within the
warranty of the supplier / dealer.
English Page 21 / 34