Eject/insert Back Stand
Use our Back Stand to have good read and/or write angle. With Bigger Stand, you
can tilt the angle of 60º for reading; with smaller Stand, you can tilt 25º for writing.
Remove and insertion of Back Stand is very easy for you:
To eject Back Stand: move the Back Stand ejector to the left and draw the stand out at
the same time.
To insert Back Stand: push Back Stand firmly into the groove.
You can have a secondary (backup) battery here by replace Back Stand. The electric
connection is achieved through Rear Port.
Software keyboard and Handwriting recognition program
Your ePad has software keyboard and handwriting recognition program.
Click on the sixth icon below once and wait for 2 seconds, that’s pop up option menu
for you to select LargeKeyboard or smaller keyboard.
Double click it to toggle on/off software keyboard.
“Transcribe” is the handwriting recognition program by Microsoft.
There is a shortcut on desktop or launch it with LargeKB (hand icon on right side).
Click on the first icon below once to toggle handwriting and mouse.
In handwriting mode, tap the second icon once to prompt “Correction” window.
Tap the third icon to toggle “capital” “general” and “numeric” writing mode.
Tap the forth icon to change your writing character direction.
Tap the fifth icon to pop-up symbol pad.
1
2
3
4
5
6
- 17 -
User’s guide
ePad
