ePad
Palm-reject touch panel
In order to provide a comfortable full-screen humanly inputting interface to users,
ePad
uses palm -reject touch panel that is different from popular ones. With the
help of special driver, you can write on ePad just as you do on paper without
floating your wrist in the air in fear of malfunction the touch panel.
VGA out
Plug in the mini port cable into
and CRT connector
to CRT monitor or projector.
NOTE: please turn our mini port cover to 180º to make you
plug the cable more easily
Enable VGA out from Quicksetting – Misc. and tap OK.
You will have only one displaying direction on Monitor or Projector even though
there are four directions on ePad LCD. Utilize to our hardware VGA chip
benefit, we make the LCD portrait display data to landscape direction.
Because of that, system performance may down a little slow when VGA out is
activated.
Operation environment
Operation temperature: 0~40 °C
Storage temperature: -20~70 °C
Operation humidity: 20~85% RH
Storage humidity: 20~90% RH
Remove/insert cover
The slot reserved for leather cover of Pad and also for stylus holder.
While using leather cover the upper clipping part is widened to insure the reliability.
Therefore, friction here is normal. When you want to remove the cover, we suggest
that you hold the cover directly and pull up. Do not push the clip on the top.
Because it clips so tight that is difficult to remove the cover by the clip.
- 16 -
User’s guide
e
ePad
