8
2 How to Use
1. Preparation
(1) Setting Table 1 and 2
Fit (a) and (b) of Table 1 and (c) and (d) of Table 2 on the studs (a), (b), (c) and (d) at the left and
right sides of the side plate.
When setting Table 1, be sure to put the stopper plate in the center. If Table 1 and 2 are
not properly set, the machine may not be able to fold paper correctly.
(a)
(d)
(c)
(b)
(d)
Stopper Plate
(c)
(2) Setting Paper
(1) Pulling the paper stacking table out and
set it while lifting the auxiliary table.
(2) Raise the paper feed table lever.
(3) Set the paper guide at the indication for the
size of paper stock table used.
(4) Place the paper on the feed table with its printed side facing up.
* Load the paper neatly.
* Load the paper on the paper feed table with its leading edge flush with the front plate of
feed tray.
Caution
Be sure to ensure that both Table 1 and 2
don’t have a warp and are properly fit in the
positions of the studs (a), (b), (c) and (d).
If they are improperly set, it may cause
incorrect folding, or they may come off the
machine, causing an injury.
Paper guide
Auxiliary feed table
Paper stacking
table
Paper feed
table lever
