11
Turn the slant ejection adjustment knob to the right if the lower side of the folded paper slants to
the right. Turn the knob to the left of the lower side slants to the left.
* In other cases than single fold, place the folded paper with its face down on Table 1 and make
slant ejection adjustment.
Slant adjustment knob
(6) To start Folding
Press the Start/Stop key. Then, the machine starts to fold the sheets continuously.
Press the Start/Stop again while the machine is in operation, it will be halted.
* The counter continues to add up.
If the desired number of sheets only is to be fed, set that number by pressing 1000, 100,10 keys.
Then, the Reduction Mode lamp will be on.
* In case of printed paper, use it only after the ink is dry, otherwise the paper feed rubber roller, paper
separate, fold roller, and other parts of the unit will be stained with ink, causing trouble.
* Under the following conditions, the machine will automatically stop feeding.
• When the Start/Stop key is pressed while there is no stock.
• When the Start/Stop key is pressed while the paper feed lever is at the lower position.
• When the stock runs short •
• When paper feed slip occurs • When paper jam occurs at Table 1 and Table 2
•
when paper stack table is full.
• when paper jam occurs at the paper ejecting unit.
* Press the Clear/Reset key to reset after the error is corrected.
(7) To Stop Paper Feed
Press the STOP key to halt paper feed while the machine is in operation.
(8) Correction of Paper Jam
Should paper jam occurs, switch the power off immediately and remove the jammed sheets.
When the jammed paper is stuck around the folder roller or other parts, it can be easily removed
by detaching the Table 1 and 2 from the unit.
* When the roller cover is opened, the machine will stop the operation in an instant.
