EP Equipment IMOW ICE251, Operation Manual

Page: 4 / 95

II
WARNING!
TO PREVENT SETIOUS RISK OF INJURY TO
YOUORSELF AND OTHERS OBSERVE THE
FOLLOWING SAFETY INSTRUCTIONS.
These truck may become hazardous if adequate maintenance is neglected. Therefore,
adequate maintenance facilities, trained personnel and procedures should be
provided.
Maintenance and inspection shall be performed in conformance with the following
practices:
1. A scheduled planned maintenance, lubrication and inspection system should be
followed.
2. Only qualified and authorized personnel shall be permitted to maintain, repair,
adjust, and inspect truck.
3. Before leaving the truck:
– Do not park the truck on an incline.
– Fully lower the load forks.
– Push the travel combination switch to neutral ,prevent the truck started unexpected.
– Press the emergency stop switch .
– Set the key switch to the "OFF" position and remove the key.
4. Before starting to operate truck:
– Be in operating position
– Place directional control in neutral
– Before operating truck, check functions of lift systems, directional control,speed
control,steering, warning devices and brakes.
5. Avoid fire hazards and have fire protection equipment present. Do not use open
flame to check lever, or for leakage of electrolyte and fluids or oil. Do not use open
pans of fuel or flammable cleaning fluids for cleaning parts.
6. Brakes,steering mechanisms, control mechanisms,guards and safety devices shall
be inspected regularly and maintained in legible condition.
7. Capacity, operation and maintenance instruction plates or decals shall be
maintained in legible condition.
8. All parts of lift mechanisms shall be inspected to maintain them in safe operating
condition.