EP Equipment IMOW ICE251, Operation Manual

Page: 29 / 95

22
Warning!
a. Don’t tie the wire ropes on the
incorrect position.
b.
Don’t carry a load to wire ropes
suddenly.
2.1.2Securing the truck during transport
The truck must be securely fastened when
transported on a lorry or a trailer.
- Parking the truck securely on a lorry or a
trailer. See "Safety Regulations for the
Operation of Forklift Trucks" .
- The rope is used to fix the truck must be
firm enough. The rope round the mast above
the beam and fixed to truck.
- Check both sides need to fix.
Loading must be carried out by staff specially
trained. In each case correct measurements
shall be determined andappropriate safety
measures adopted.
2.1.3 Towing
·The towing rod on the bottom of the counter balance is used to pull and drag the
truck.
Towing procedure
You can tow the forklift to the safe place with towing
rod when the forklift can’t run.
Don’t tow the truck of which its steering system or brake system has been damaged.
–
Press the emergency stop button.
–
Lower the goods, but do not allow the fork arms to touch the ground.
–
Remove the load.
–
Pull on the hand brake lever.
–
The driver should operate the steering wheel during towing, and the brake when
necessary.
–
Do not exceed the truck's maximum working speed when towing.
2.2 Using the Truck for the First Time
Only operate the truck with battery current. Rectified AC current will damage the
electronic components. Cable connections to the battery (tow leads) must be less
than 6 m .