EOS Zeus HD / Zeus L HD - Installation and Operating Instructions
EN-31
Electrical installation
4.2.3 Establishing an electrical connection
The connections for the heating coils are attached to the bottom of the
heater. The connecting cable is mounted on the terminal box with cable
screw connections and must be connected to the power supply. In order to
be able to remove the heating coil later, the connecting cable must be long
enough so that a loop can be made with it The connecting cable is not
included in the heater's scope of delivery.
Connecting the connecting cable to the sauna relay box
1
2
Mount the connecting cable on the cable screw connections (
B
) on the
terminal box of the heating coil (
A
).
The metal duct protects the connecting cable from the heat radiating
from above.
3
4
Insert the connecting cable (
D
) into the metal duct (
C
) and route it to the
back of the heater.
5
Route the connecting cable (
D
) along the internal side of the heater wall
downward.
Lay a cable loop with sufficient cable length in the heater to ensure
that sufficient cable can be fed when the heating coil is removed.
A
Terminal box for the heating coil
B
Cable screw connection
C
Metal duct
D
Connecting cable
E
Rounded protrusions
A
B
C
D
E
