InfraStyle / InfraStyle i - Installation Instructions
63
Installation
5.6 Configuring the relay box
Once the IR emitters are installed and connected, the jumpers for the type
of IR emitters and channel groups must be set. As a rule, the unit address
for the relay box must not be changed. In installations with InfraStyle and
InfraStyle i control panels, relay boxes are always assigned cabin address 1.
Setting the jumper for the type of IR emitters,
Setting channel groups for IR emitters,
Setting the jumper for the type of IR emitters
1
DANGER! Ensure that the IR relay box is current-free.
Open the housing as needed.
2
Set jumpers JP1 and JP2 to foil (F) or emitter (R) depending on the con-
nected IR emitters.
See 5.2.2 Emitter type – jumper JP1 and JP2,
