EOS ECON 45A2, Assembly And Operating Instruction

Page: 35 / 59

35 GB
Please consider that the cubicle must heat
up for around 40-50 minutes to achieve an
appropriate temperature. If, for example, you
want to start your sauna at 18.00 select the
preset time to 17.10.
Using the and buttons, you can now
set the desired set time.
To save the new set time, press the „
MODE
“
button and hold it down until the newly ente-
red value is permanently displayed.
Press the „
MODE
“ button. The display starts
to fl ash.
17 : 10
17 : 10
19 : 00
To deactivate the preset time, press the button. This switches the sauna heater on.
Pressing the button again switches the sauna heater off.
To activate the preset time, press the
button. The display shows the current time
and the preset time alternately. When the
preset time arrives, the sauna heater swit-
ches itself on.
Deactivating the preset time
17 : 10
15 : 00