EOS ECON 45A2, Assembly And Operating Instruction

Page: 37 / 59

37 GB
Extended heating time
(commercial use)
Attention! Completely disconnect the con-
trol unit from the electrical circuit!
In its delivery condition the control unit is
set to a maximum heating period of 6 hours.
The heating time limit can be extended to
12 hours.
To do this, the jumper is plugged in accor-
ding to the illustration opposite.
For the private sector, the
maximum heating time is 6
hours. Extending this time to 12 hours
is only allowed when operated under
supervision (commercial use).
In case of breakdown, press the control unit
switch on the left part of the rocker to the
fi rst position (switch position 0). The unit is
now completely switched off.
The control unit switch (Switch-
off)
The control unit switch can be found on the
top end of the unit. Using this
switch, you can isolate the electronics from
the mains supply in case of a breakdown.
Please note that operating the control unit
switch returns all settings to the factory
settings.
In order to switch on the light in the sauna
when the unit is switched off, press on the
left part of the rocker to the second position
(switch position II).
In order to put the unit back into operation,
switch back to the starting position (switch
position I).
Control unit switch
= unit swit-
ched on
= unit swit-
ched off
= light swit-
ched on
Jumper
6 h 12 h