EOS Bi-O Invisio, Assembly And Operating Instruction

Page: 23 / 40

23
EN
max. F
üllhöhe
Filling funnel
Silicone hose
Fabric hose
Drain cock
Fig. 4
Fig. 3
To release the water, the enclosed fabric hose is
inserted onto the second hose connector of the
tank. The drain cock is mounted with a nozzle
to the other end of the fabric hose. This end can
be used to to drain residual water separately in
the cabin or outside.
When installing the fabric hose ensure that the
ball cock is always in the lowest position. (Fig. 4)
The auxiliary vaporizer is filled normally using
the supplied funnel. This must be attached at
the specified height to a part inside the cabin.
The enclosed silicon hose and a hose connec-
tor are used to connect the pipe socket of the
funnel to the lower side of the vaporizer. Both
ends need to be secured with the enclosed
hose bands. (Fig. 3)
Silicone hose piece
Stainless steel pipe
Silicone hose piece
Cut approx. 50 mm off the
supplied silicon hose.
Adapt the length of the steam
pipe 50-300 mm via the length of
the silicon hose.
max. filling height
Mounting srew
Mounting srew