EOS Bi-O Invisio, Assembly And Operating Instruction

Page: 20 / 40

20 EN
Electrical connection
Your electrician will be able to accomplish this
work without further explanation in accord-
ance with the provided wiring diagram and
with the help of the circuit diagram mounted
inside the respective control unit.
Be sure to note, however, that live wires should
not be visibly laid onto the inner cabin walls
due to safety considerations. For this reason,
the wall element with the air intake vent is usu-
ally already equipped with cable conduits in
most sauna cabins
Should there be no cable conduits in your cab-
in, drill a hole in the cabin wall immediately
adjacent to the sauna heating unit where the
cable projects from the sauna heating unit and
pull the cable through this hole towards the ex-
terior and then to the control unit. The cable as
well as all other connecting lines (supply wire
to the power source and to the cabin lighting)
on the outside wall of the cabin should also be
protected from damage, for ex. by installation
in cable conduits or by covering with wooden
skirting strips.
Attention!
Dear customer,
according to the valid regulations, the
electrical connection of the sauna heater
and the control box has to be carried out
through the specialist of an authorized
electric shop.
Please be advised that in case of a war-
ranty claim, you are kindly requested to
present a copy of the invoice of the elec-
tric shop which carried out all works.
atile oils than advised on the packaging.
Never use alcohol or undiluted concen-
trates. Caution!
Fire hazard!
When designing the cabin ensure that
the external exposed glass surfaces only re-
ach a maximum temperature of 76°C. If ne-
cessary, protective features need to be fit-
ted.