Eonon G2103V, User Manual

Page: 6 / 20

5
This car multimedia entertainment system provides DVD, Radio, External Input,
Bluetooth, Navigation, SD, USB, and IPOD functions, user can realize the relevant
functions justby directly touching the function modules on the main menu. Return to
the main menu by touching the right corner on touch screen under different play modes.
As shown in the following picture:
Picture 1
Picture 2
16 17
34
1.Precautions for host machine
Do not insert hard object or other metal contents in the unit.
Do not attempt to repair it. This display screen consists of many precision electronic
components, damage or breakage may be resulted in by any dismantlement or
modification, power it off immediately in case of a failure, and notify the company or
your dealer of that.
Do not expose the display screen to humidity, dust, steam, oily fume or any other
pollutants.
Do not wipe the surface of display screen with thinner or other chemical cleaners;
wipe away the dirt on the surface with a soft cloth.
Do not expose the display screen to sunlight for a long time.
If moisture content or other objects enter this unit, power it off immediately and
contact with the company or your dealer.
Please cut off the power when clearing off the dirt.
This product is designed for the vehicle equipped with 12V negative grounding
battery system.
2. Precautions for Use of Disc
Misoperation would be caused when dirty, dusty, scratched or bended disc was used.
Do not put it on sharp objects to prevent disc being scratched.
Disc shall be taken out when not used.
Disc shall not be placed in the following areas:
1.Area exposed to direct sunlight.
2.Dirty, dusty and humid areas.
3.Area where there is an auto heater nearby.
4.On vehicle seat or meter panel.
Do not use disc with diameter less than 12cm (12cm excluded) or irregularly shaped
disc (heart shape or octagon and so on)
Disc cleaning: wipe the disc surface with a soft wet cloth; if the disc is very dirty, wipe
it gently with a soft cloth soaked with warm propanol liquid. Do not use solutes, such
as gasoline, thinner and so on, to prevent disc surface being scratched.
3. Precautions for External Connected Power Amplifier
Before connecting, check to ensure the sound box impedance matches the optimal
matching impedance of power amplifier.
Please select high-quality loudspeaker cable; the cable length shall be just sufficient
for proper in-position connection.
When connecting the signal line, the jack/interface of sound track shall match exactly.
To reduce noise, when there is a external connected power amplifier, first adjust the
volume of Host machine to 1/3 of the maximum sound level, and then adjust the
volume of external connected power amplifier, till the sound is distorted (note: the
tone shall be adjusted centered).
While in installation, the input/output line shall be far away from power source and
computer wire, otherwise noise may be caused.
Precautions