eOne
eOne
7
Priming the Pump
Plug in the pump,
the display will read
SETUP FW01 VFT
.
Press the arrow
to the right to reach
FW03
MF
.
Push the
START/STOP
button twice. Screen shows
OPERATING MODE/ MANUAL MODE.
Loosen the air
bleed nut. Push
the
START/STOP
button to begin the
priming functions.
The pump will begin to
stroke/click.
Once the chemical
starts going down
the air bleed tube,
re-tighten the air
bleed nut
back up.
Chemical should
start going up
the discharge
tube and toward
the injection valve.
Push the
START/STOP
button to stop the priming
function once chemical reaches the injection valve.
Pump Priming
1
2
4
5
6
3
