2
INSTRUCTION TO ASSEMBLE THE MICRO-DOSER KIT PLUMBING SECTION
Remove the white clear caps from the ends of the
Water Meter
, and discard.
To attach the
Adapters
to the ends of the
Water
Meter
, slide the
Adapter
through the
Nut
. Place the
Gasket
between the
Adapter
and the
Water Meter
threads, as indicated in the image. Hand tighten
the
Nut.
Wrap
Thread Tape
4 to 5 times on all threads,
except on the
PRV Adapter Kit
parts. Make sure to
wrap tape clockwise to prevent from unraveling.
Attach a
Union
to the inlet side of the
Water Meter
.
Make sure the arrow on the
Water Meter
is pointing
in the direction of the flow.
Attach the
Check Valve
to the outlet side of the
Water Meter
. Make sure the arrow on the
Check
Valve
is pointing in the direction of the flow.
Attach a
Close Nipple
to the
Check Valve
.
1
2
3
4
¾” Micro-Doser Kit
Step-by-Step Assembly Instructions
5
6
