15
Revision 2
21/12/2021
SP - MAN - SERVICE - 01
8.3 Replacing the nozzle
As part of a burner service, the oil nozzle must be replaced.
To access the nozzle simply loosen the nozzle holding plate
fastening screws.
Fig. 32
With the nozzle holding plate screws loose, slide the nozzle
holding plate up.
Fig. 33
With the nozzle holding plate slid up, simply pull out the
Nozzle pipe assembly.
Fig. 34
With the oil pipe assembly removed, the nozzle can then
be changed.
Fig. 35
Once the nozzle has been changed, simply reverse the
procedure
to refit the inner oil pipe assembly back onto
the burner.
Use the handy nozzle removal tool built into the left hand
side of the boiler casing for ease.
Fig. 37
Fig. 36
Fig. 35
Fig. 34
Fig. 33
Fig. 32
Maintenance / Service