background image

8

1.2  WARRANTY INFORMATION AND REGISTRATION                                                                       

1.2.1  WARRANTY INFORMATION

This product is guaranteed to be free from manufacturing defects in material and workmanship under 

normal use for a period of two (2) years from the date of purchase. In the event that a defect covered by 

the below warranty occurs during the applicable period stated above, EOC Company, at its discretion, 

will either repair or replace the product; such action on the part of EOC Company shall be the full extent 

of EOC Company’s liability, and the Customer’s sole and exclusive reparation. This warranty does not 

cover a product if it has (a) been used in ways other than its normal and customary manner; (b) sub-

jected to misuse; (c) subjected to alterations, modifications or repairs by the Customer of by any party 

other than EOC Company without prior written consent of EOC Company; (d) special order or “close-

out” merchandise or merchandise sold “as-is” by either EOC Company or the EOC Company dealer; 

or (e) merchandise that has been discontinued by the manufacturer and either parts or replacement 

units are not available due to reasons beyond the control of EOC Company. EOC Company shall not be 

responsible for any defects or damage that in EOC Company’s view are a result from the mishandling, 

abuse, misuse, improper storage or improper operation of the device, including use in conjunction with 

equipment that is electrically or mechanically incompatible with, or of inferior quality to, the product, 

as well as failure to maintain the environmental conditions specified by the manufacturer. CUSTOMER 

IS HEREBY NOTIFIED THAT OPERATION OF THE EQUIPMENT DURING DAYLIGHT HOURS OR UNDER ANY 

EXCESSIVE  LIGHT  CONDITIONS  MAY  PERMANENTLY  DAMAGE  THE  INTERNAL  COMPONENTS  OF  THE 

UNIT AND SAID DAMAGE WILL NOT BE COVERED UNDER THIS WARRANTY. This warranty is extended 

only to the original purchaser. Any breach of this warranty shall be enforced unless the customer noti-

fies EOC Company at the address noted below within the applicable warranty period.
The  customer  understands  and  agrees  that  except  for  the  foregoing  warranty,  no  other  warranties 

written or oral, statutory, expressed or implied, including any implied warranty of merchantability or 

fitness for a particular purpose, shall apply to the product. All such implied warranties are hereby and 

expressly disclaimed.

1.2.2  LIMITATION OF LIABILITY

EOC Company will not be liable for any claims, actions, suits, proceedings, costs, expenses, damages or 

liabilities arising out of the use of this product. Operation and use of the product are the sole respon-

sibility  of the Customer.  EOC  Company’s sole undertaking is  limited  to  providing  the products and 

services outlined herein in accordance with the terms and conditions of this Agreement. The provision 

of products sold and services performed by EOC Company to the Customer shall not be interpreted, 

construed, or regarded, either expressly or implied, as being for the benefit of or creating any obliga-

tion toward any third party of legal entity outside EOC Company and the Customer; EOC Company’s 

obligations under this Agreement extend solely to the Customer. EOC Company’s liability hereunder 

for damages, regardless of the form or action, shall not exceed the fees or other charges paid to EOC 

Company by the customer or customer’s dealer. EOC Company shall not, in any event, be liable for 

special, indirect, incidental, or consequential damages, including, but not limited to, lost income, lost 

revenue, or lost profit, whether such damages were foreseeable or not at the time of purchase, and 

whether or not such damages arise out of a breach of warranty, a breach of agreement, negligence, 

strict liability or any other theory of liability.

1.2.3  PRODUCT WARRANTY REGISTRATION

In order to validate the warranty on your product, EOC Company must receive a completed Product 

Warranty Registration Card for each unit, or the Customer can complete a warranty registration on our 

website, at www.eoccompany.de. Please complete the included form (Appendix C) and immediately 

mail it to our Service Center: 
EOC EUROPEAN OPTIC COMPANY GmbH

Dopplerweg 4A,

40591, Düsseldorf, Germany.

Summary of Contents for NYX-14









































Reviews: