18
Call 1300 369 273
www.enware.com.au
troubleshooting
BOTTLE FILLER
PROBLEM
CAUSE
RECTIFICATION
Water runs constantly
from outlet
Dome screwed in too far
Adjust dome. See DOME
ADJUSTMENT
Dome incorrectly adjusted Adjust dome. See DOME
ADJUSTMENT
Debris fouling ball seating
washer or stainless steel
ball
Dismantle SBA and clean
SBA ball seating washer
is damaged or spring is
broken
Replace SBA components using
SBA service kit BUB289,or replace
SBA
No flow from outlet
Water supply turned off
Turn water on
Debris fouling inlet or
outlet ports of SBA
Remove SBA and remove blockage
Rubbish/debris fouling
outlet
Remove blockage from outlet
Dome incorrectly adjusted Adjust dome. See DOME
ADJUSTMENT
Push button feels too
loose
Dome screwed out too far
Dome incorrectly adjusted
Adjust dome. See DOME
ADJUSTMENT
Spring action does not
move
Piston in SBA is seized
Clean piston and piston o-rings,
and re-grease. Use SBA service
kit BUB289. (See service and
maintenance)
Water discharge from top
of dome/ SBA
Piston O-rings are worn
Replace O-rings using SBA service
kit BUB289. Re-grease piston (See
service and maintenance)
