ENVO SNOWKART MANUAL
|
VERSION 1.1
42
6.8.2 . E X IT C PA R A M E T E R S E T TI N G
Among the twelve C parameter settings, when each parameter setting is completed, if held
button (SW) long for about 2 seconds, all can exit the setting environment and return to Display
1, meanwhile, the current set parameters would be saved.
Under each parameter setting interface, if there’s no button operation on the meter for more than
1 minute, and then the meter will automatically return to Display 1, and the original set parameters
will be saved.
I M P O R TA N T N OT E:
After entering the user setting environment, if there’s no button operation on the data for more
than 1 minute, the meter will automatically return to display1, and the new set parameters
won’t be saved. The factory parameter set value and the default value of the meter can be
set according to user requirements, the meter parameter can be restored by using “C10
automatically restore factory setting mode” approach when adjusting it.
6.9. H A N D T H R OT T L E C O NT R O L
• The ENVO SnowKart is equipped with a thumb throttle, which is located on the right side of the
handlebar
• The throttle is designed to let the user apply 0-100% of the motor’s power at will.
• When you want to slow down, you simply release the throttle and let it return to its resting
position and simultaneously apply the brakes
6.1 0. O P E R AT I N G R A N G E
The range on SnowKart can vary greatly and are heavily dependent on these factors:
• Battery age
• Rider and luggage weight
• Snow conditions (soft or hardpacked)
• Wind speed and direction
• SnowKart usage (heavy acceleration and high speeds will drain the battery faster)
• Slopes or hills
• Weather and temperature
