ENVO SNOWBIKE KIT MANUAL
|
VERSION 1.2
40
E R RO R C O D E D E FI N ITI O N TA B L E
6.5.2 . M OTO R O PE R ATI N G T E M PE R AT U R E A L A R M
Under any interface, when the motor operating temperature exceeds the warning value, the motor
operating temperature display flashes to alarm, meanwhile, the controller will offer the appropriate
protection to motor.
E R RO R C O D E
D E FI N ITI O N
01 info
Throttle abnormality
02 info
Motor hall signal abnormality
03 info
Torque sensor signal abnormality
04 info
Battery does not charge up with standard charger
05 info
Axis speed sensor abnormality (only applied to torque sensor )
06 info
Motor or controller has short circuit abnormality
6.4.12 . S I N G L E DATA C L E A R I N G
5 seconds after the meter is powered on, at Display 1, hold both the button (UP) and the
button (DOWN) simultaneously for about 2 seconds, the single trip time (TM) and single trip
distance (DST) flicker, then hold button (SW) shortly, the record contents of both will be
cleared.
Under the status of data flashing, if there were no operations on the data within 5 seconds, the
meter will automatically return to display1 after 5 seconds, and the original record content will be
saved.
6.5.E R R O R C O D E S
6.5.1. E R RO R C O D E D I S PL AY
When the electronic control system of the electric vehicle fails, and the meter will automatically
display (flicker) fault code. You can’t exit the fault code display only the fault is removed.
