ENVISION GLASSES
ENVISIONER’S GUIDE
32
3. Select ‘Bluetooth’.
4. One-finger double tap on ‘Connect devices’. You will hear a pending sound.
This means the Envision Glasses are looking for nearby Bluetooth devices.
5. A list of nearby Bluetooth devices will be read out. Swipe through with one
finger to find the name of your desired Bluetooth device.
6. One-finger double tap on the name of your desired Bluetooth device.
7. A processing sound will play. After this, your device should be connected and
audio should play from your Bluetooth device.
5.2.2 Connecting to AirPods
The instructions below are meant for AirPods and all other devices which use
Apple’s W2-chip (AirPods Pro, Beats Powerbeats, etc.).
1. With both AirPods inside the charging case, open the lid.
2. Press and hold the button on the back of your charging case. The status light
will begin to flash white, indicating your AirPods are in Bluetooth Pairing mode.
3. Grab your Envision Glasses and go to ‘Device Settings’.
4. Navigate to ‘Bluetooth’.
5. A list of nearby devices will be read to you. One-finger swipe to the name of
your AirPods.
6. Take the AirPods out of the case and put them on.
7. One-finger double tap on the name of your AirPods and wait.
8. A success sound will play when your AirPods are connected with the Envision
Glasses. In some cases, it might take up to 10 seconds before the sound plays.
5.3 USB-C
At the back of the body, you will find a port to connect USB-C devices to the
Envision Glasses. This port is used to charge the glasses with the provided cable,
but it can also be used to attach earphones or speakers to your glasses. Any USB-C
audio device can be used with the Envision Glasses. Simply plug in the device and
the sound will come from the speakers or earphones.
