SHOULD YOU ENCOUNTER ANY PROBLEMS INSTALLING THIS UNIT CALL
01423 859 395
5
230V Version
6. This fan must be installed by a competent
person. Offer up the central cartridge join green
male/female connector (230V) and carefully
insert central cartridge into back carcass.
Insert four silver screws to fix central cartridge
in place. N.B. Take care not to trap cables. (Fig
4.)
7. This fan is factory set to kitchen duty with
humidity tracking function. If two speed or
bathroom option is required, commission
fan by setting slider switch as appropriate
(Fig.5a/5b). Fix supplied gasket over selector
switches.
8. Check impeller is fitted correctly - ensure ‘click’
action engaged cleanly. (Fig. 6)
9. Fix front cover. Ensure pull cord nestles into groove.
N.B. Fan will not operate unless front cover is
in position. (Fig. 7) place.
Fig.5a
Fig.5b
Fig.6
Fig.7
1. LEFT - Humidity Tracking
RIGHT - Two Speed
2. SLIDER NOT USED
1. LEFT - Humidity Tracking
RIGHT - Two Speed
2. LEFT - Kitchen
RIGHT - Bathroom
OTHER APPLICATIONS/VARIATIONS
For recessed only installations we can supply a bezel.
COMMISSIONING:
T
his fan is factory set to kitchen duty with humidity tracking function.
INSTALLATION INSTRUCTIONS
SELV SLIDER
230V SLIDER
