background image

2

The Cyclone 7 is a major advancement in extract fan 

technology, designed to deliver high performance in 

controlling humidity levels in kitchens, bathrooms and 

utility rooms using the lowest energy consumption.

The Cyclone 7 also incorporates patented BioCote

®

 

antibacterial protection to inhibit the growth of bacteria, 

microbes and mould on the surface of the fan by up 

to 99.9%.

ENERGY USE

The Cyclone 7 uses ultra Low Watt Motor Technology 

to achieve the lowest running costs of any domestic 

extract fan. It uses only a minimal amount of electricity 

whilst eliminating stale and moist air from the home. 

This gives an annual running cost of only £1.97 based 

on an electricity cost of £0.15 per unit (KWH), and a two 

hour ‘boost’ per day.

Household Appliance

Time required to consume 

£1.97 of electricity

Cyclone 7

1 Year

Fridge Freezer

6 and a half days

21” Television (viewing time)

5 and a half days

100W Light Bulb

5 and a half days

Home Computer

1 and a half days

Games Console

1 and a half days

Iron

13 Hours

Tumble Dryer

5 and a quarter hours

Coldfill Dishwasher

7 Full Loads

HOW IT WORKS

The Cyclone 7 works in a constant trickle mode to 

create background ventilation to maintain a healthy 

environment.

Vapour tracking
As standard the unit is fitted with vapour tracking. The 

fan senses the amount of moisture being created in 

the room which causes the fan to increase in speed to 

match the rising humidity and reduce in speed to match 

falling humidity. This intelligent function reduces your 

energy costs, wear and tear on the motor and ensures 

a long quiet life.

Pullcord
All  units  are  fitted  with  a  pullcord  override  for  odour 

control (if remote see below). In the event that you 

wish to activate the fan to full power in conditions of 

low humidity simply pull on the pullcord and the fan will 

boost to maximum extraction rate.

OPTIONS

Remote control
Remote control override for odour control. In the 

event that you wish to activate the fan to full power 

in conditions of low humidity simply press the remote 

control boost switch and the fan will boost to the 

maximum  extraction  rate  for  3  to  4  minutes  before 

returning to the trickle extract rate.
N.B: When battery requires changing, unscrew the 

switch front cover. The battery is located on the back 

of the cover (CR2032) lithium coin battery). Switch 

will remain paired with the fan even after battery 

replacement.

Remote Switch Wire
The unit is available with a remote switch wire. On these 

units the boost switch may be located up to 3 meters 

away from the unit.

Summary of Contents for cyclone 7













Reviews: