INSTALLATION
2
4
NOTE:
If you have electrical
questions consult your local
electrical code for approved
grounding methods.
Thread the fixture mounting screws
(FF) into the provided holes of the
mounting bracket (GG).
Thread the hex nuts (BB) onto the
fixture mounting screws (FF). Do not
tighten the hex nuts (BB) at this time.
Pull the supply wires out from the
outlet box and mount the mounting
bracket (GG) to the outlet box using
the bracket mounting screws (EE).
Connect the black supply wire to
the black fixture wire using a wire
nut (DD).
Connect the white supply wire to
the white fixture wire using a wire
nut (DD).
Connect the fixture ground wire
to the supply ground wire using a
wire nut (DD).
Wrap all wire connections with
electrical tape for a more secure
connection.
EE
GG
FF
BB
Place the back plate of the fixture body (A) over the outlet box and onto the
fixture mounting screws (FF).
Adjust the fixture mounting screws (FF) until they protrude out from the back
plate 1/4 in.
Remove the fixture body (A) and secure the position of the fixture mounting
screws (FF) by tightening the hex nuts (BB)
1
DD
GG
A
