a
Djusting
t
he
p
iLot
F
Lame
:
The pilot flow adjustment is set to maximum at the factory and should not need to be adjusted. The pilot
flame should envelope ⅜” to ½” (10 to 13mm) of the thermocouple (see Figure 27). However, should
the need arise, follow Steps 1- 2 below.
Figure 27: Proper Pilot Flame
.
Initial Installation
QUALIFIED INSTALLERS ONLY
1. The adjustment screw can be reached through the front of the
unit using a 10 inch flat head screw driver (see Figure 27 for
location on valve).
2. Turn the adjustment screw clockwise to decrease or
counterclockwise to increase pilot flame.
24
Summary of Contents for EG31 Nova
Page 34: ...Notes 34...
