Installation
M
OBILE
H
OME
I
NSTALLATION
:
•Secure the heater to the floor using the two bolt holes supplied in the pedestal.
CAUTION: THE STRUCTURAL INTEGRITY OF THE MANUFACTURED HOME FLOOR, WALL,
AND CEILING/ROOF MUST BE MAINTAINED.
•Ensure the unit is electrically grounded to the chassis of your home (permanently).
•Do not install in a room where people sleep.
•Outside fresh air is mandatory when installing into airtight homes or manufactured homes.
F
RESH
-A
IR
C
ONNECTIONS
:
NOTE:
Fresh air is mandatory on all units installed in “Mobile Homes” as well as in “Air
Tight” homes.
When connecting to an outside fresh-air source, do not use plastic, combustible pipe. Only 2” (5 cm) ID
steel, aluminum or copper pipe should be used. It is recommended, when you are installing a fresh-air
system, to keep the number of bends in the pipe to a minimum.
18
Figure 20
