32
Secondary Installation
33
f
iRebox
L
ineR
anD
b
uRneR
t
ube
R
emoVaL
:
NOTE: The firebox liners are fragile and should be handled gently.
1.
Ensure the E33 is turned off and allow the unit to cool.
2. Remove the glass door as shown in the
m
aIntenanCe
anD
s
erVICe
- g
lass
D
oor
r
emoVal
.
WARNING:
Do not touch or attempt to remove the glass if the fireplace is not completely cool.
Never operate the fireplace with the glass removed.
Figure 50:
The log grate is removed next by
simply lifting it off the grate tabs.
Figure 49:
Carefully remove the front liner (if
installed) on the bottom of the firebox by picking
it up gently.
Figure 51:
Remove the 6 screws highlighted in
figure 50 using a Torx T-20 screwdriver and
remove the air deflector
Figure 52:
Lift the burner off the mounts and pull
it out of the inlet box. The unscrew the panel
brackets (T20’s) from each side of the baffle to
remove the left and right side liners.
3. Remove the log set and all ember material (if installed).
4. Use the following steps to remove the liners and the burner tube.
NOTE: Follow the steps in the reverse order for reassembly.
Figure 53:
The rear liner can now be removed. Use
a vacuum to clean up the bare firebox if needed.
Figure 48:
The firebox with log set and media
removed.
