29
Installation:
1. If unit is running, turn it off and
allow it to cool completely.
2. When using more than one riser
each level must be attached
using nine (9) #8 T-20 screws
provided (see Figure 35).
3. If installing with riser(s) the
Base Shelf is to be fastened
to the riser(s) with one T-20
screw at each end of the back
(see Figure 36).
Figure 35: Combining 2 Base Shelf
Riser.
Figure 36: Installing Base Shelf
onto Riser.
4. The leveling legs on the E30I may need to be adjusted to match
the height of the riser and shelf.
5. Center the Base Shelf assembly in front of the unit flush with the
bottom of the unit.
6. Install surround if required.
Secondary Installation
o
ptionaL
b
ase
s
heLf
& R
iseR
:
The E30I Base Shelf (1⅝” (41 mm) high) and Base Shelf Riser (2⅛” (54 mm) high) are components that
can be combined to create a riser with an overall height of 2
3
/
16
” (55 mm). This shelf can be installed
with or without the riser and can be used when the hearth in front of the unit is lower than the fireplace
opening. Additional Base Shelf Risers can be fastened together to increase the height in increments of
2⅛” (54 mm). This Base Shelf may be used in conjunction with the any of the E30I surround panel
options, and it may also be used with the E30I Trimmable Surround. The Base Shelf and Riser are sold
separately.
