22
Initial Installation
QUALIFIED INSTALLERS ONLY
s
teeL
s
tuD
:
Figure 27:
Steel Stud Assembly
Figure 28:
Steel Stud Placement
Figure 29:
Steel Stud Attachment
Figure 30:
Steel Stud Installation
Framing of the fireplace requires a steel stud
placed above the unit. The steel stud included
with the fireplace comes in two pieces that
combine to create a telescopic steel stud.
This allows for horizontal adjustment to fit the
specific length of your unit.
• Take the two steel stud pieces and slid
them into each other. The flanges of each
piece should be at the end of the assembly,
as well as facing upwards as shown in
Figure 27.
•
Place the steel stud onto the top standoffs
and slide outwards until both ends make
contact with the framing studs (see Figure
28).
• Using the provided sheetmetal screws, attach the
two steel stud pieces together using the labeled
holes in Figure 29. This should be done on the
top and bottom of the steel stud to ensure its
rigidity.
• Attach the steel stud to the framing studs using
the holes shown in Figure 30.
Summary of Contents for C60I
Page 55: ...55 55 Parts Diagram 1 2 3 5 11 6 13 4 10 9 7 8 12 14 15 15 ...
Page 57: ...57 Notes ...
Page 58: ...58 Notes ...