19
Quantity Description
1
Surround panel extension
2
Small rectangular bracket
1
Left mounting bracket
1
Right mounting bracket
8
1⁄4” bolts
Figure 21. Assembly diagram of cast iron surround panel
extension.
Please inspect all components for damage. If damage
has occurred please contact the courier company,
dealer, or distributor and have components repaired
or replaced before installation.
INSTALL SURROUND PANEL EXTENSION TO
THE TOP:
Place the extension on top of the surround
panel with the wider side facing up. Bolt the cast
iron extension in place using the small rectangular
brackets and eight 1⁄4” bolts (four on each side)
supplied with the extension.
INSTALL SURROUND PANEL EXTENSION TO
THE BOTTOM:
Place the extension under the
surround panel with the widest side facing up. To
bolt the extension onto the bottom the old mounting
brackets on the panel have to be replaced with the
new side mounting brackets and eight 1⁄4” bolts (four
on each side).
Secondary Installation
C
AST
I
RON
S
URROUND
P
ANEL
E
XTENSION
T
RIM
K
IT
:
2. With the brackets removed the side panels can
be taken out of the firebox. See Figure 19.
3. Remove back panel. See Figure 20.
To replace the panel set follow steps 1 through 3 in
reverse order. Ensure the panels are flush against
the back/sides of the firebox before installing the
brackets.
Figure 20: Back brick panel.
Figure 19: Side and back brick panel.
