Disassembly
d
oor
l
atcH
a
djustment
:
Over time as the door gasket fully compresses to the face of the firebox, it may be necessary
to adjust the door latch position to maintain a tight seal. Signs that the door latch may need
adjusting are if the door handle feels overly loose when closed, or if you notice air leaks
occurring during low burns.
1. Follow the disassembly steps from Figures 25-28 (Right side only).
2. Use a 3/8” socket to loosen the two 1/4” bolts and slide the latch slightly back. Retighten
the bolts and latch the handle. The handle should provide a bit of resistance and close firmly.
29
Figure 34: Latch Adjustment
1. Follow the disassembly steps from Figures 25-
28 (Left side only).
2. Pull off the fan control dial by lifting up.
3. Unplug the wire connections. A light wiggle
will help loosen the connectors.
4. Use a 3/8” socket to remove the two 1/4”
bolts. The entire fan assembly can now be
removed.
r
emoval
o
F
F
an
a
ssemBlY
Figure 32: Fan Removal
Figure 33: Fan Assembly Removed
