background image

Thank you for selecting Envertech– a leading supplier of micro-inverter products for 
the solar PV market. Envertech’s new product “EnverBridge” acts as the power 
interface (PI) to the utility grid. It is an information gateway for the Envertech 
Microinverter. The data of real-time performance information of energy harvest for all 
Envertech micro-inverter systems can be collected by EnverBridge, and be transmitted 
to Envertech Monitoring Device called EnverPortal to achieve a global data 
monitoring for PV power plant.
The user manual includes EnverBridge overview, installation, operation instruction and 
technical parameters. To assure properly installation and operation, please carefully 
read this user manual before installation, and pay attention to the caution symbol 
affixed on the product. 
Please hand the user manual to the end user. 

2.Symbols in the manual

2.2 Other Symbols

!

DANGER

1

2

1 Read This First

2.1 Safety symbols

Warnings and cautions tell you about the dangerous conditions that can occur if you 
do not follow all instructions in this manual.  
Please read following safety symbols to indicate dangerous conditions and important 
safety instruction. 

DANGER            
The DANGER symbols in this manual and on the 
EnverBridge.
Indicate a hazard with a high level of risk which if
not avoided, will result in death or serious injury. 

CAUTION 
The CAUTION symbols in this manual and on 
EnverBridge indicate a hazard with a low level 
of risk which if not avoided, could result in minor
or moderate injury. 

NOTE 
The NOTE symbols in this manual indicate the 
important product information.

!

CAUTION

Some Symbols replace words on the equipment, on a display, or in manuals.

SEEYES

Trademark

No access for unauthorized personal

Caution, risk of danger

Symbol for the marking of electrical and electronics 
devices according to Directive 2002/96/EC. Indicates that 
the device, accessories and the packaging must not be 
disposed as unsorted municipal waste and must be 
collected separately at the end of the usage Please follow 
Local Ordinances or Regulations for disposal or contact an 
authorized representative of the manufacturer for 
information concerning the decommissioning of equipment.

Direct curren

Alternating current

PE

Protective conductor

Earth(ground)TERMINAL

Protective conductor Terminal

Fuse

Refer to the operating instructions

!

WARNING

WARNING 
The WARNING symbols in this manual and on the 
EnverBridge indicate a hazard with a medium 
level of risk which if not avoided, could result in 
death or serious injury.

Summary of Contents for EnverBridge













Reviews: