42
7.3 Adjusting the measurement values
The system's additional functions can be set in the following menus:
Alarms
Throughput upper/lower limit values can be set in
3. Alarm
.
A sensor monitoring alarm can also be activated here.
Analogue output
The analogue output values are assigned in
4. Analogue output
.
Upper and lower limits of the permitted power and fault current are
set here. The analogue output is an active signal. In the field housing
design, analogue output 2 + 3 are provided for the MaxxFlow HTC.
All other sensors output their 4 ... 20 mA signal to analogue output 1.
Pulse output
In
5. Pulse output
there is an option to use different pulses. A cleaning
pulse can be used for a possible pneumatic cleaning on the sensor.
Current input
In
6. Current input
different input currents can be stored. When the
current is applied, the corresponding correction factor is applied to the
measured value. The input current can also be equalised here.
System In
7. System
functions such as selection of the menu language, the
number of connected sensors and their average, the display screen or
ModBus addressing and speed are summarised.
