User Manual
Document PN: 50847
www.enttec.com
Covered by US patent 08950901
6
Please download and install the RDM Controller App from
www.enttec.com website, connect the widget to the unit,
power it up and run the application.
To make sure the process has been successful, please the
firmware version has changed by looking at the “Software
Version ID” RDM field or navigate to the Firmware Version
menu using the control panel.
RDM Capabilities
The ALEPH2 ET Mk2 supports RDM features and any RDM
Controller can be used to configure it using RDM. The
“ENTTEC RDM Controller” free App can be downloaded
from ENTTEC website and be used in combination with a
DMX USB PRO or a PRO MK2 widget.
The supported RDM parameters are:
Read only fields
•
Device Info
•
Software Version ID
•
Supported Parameters
•
Parameters Description
•
DMX Personality Description
•
Sensor Value (temperature x 2)
•
Sensor Definition
•
Boot Software Version
•
Manufacturing Label
•
Device Label
•
Status Messages
User configurable fields
•
Identify Device
•
DMX Start Address
•
PID_8001: Master faders
•
DMX Personality
•
Factory Defaults
•
Lamp On Mode
•
Reset Device
•
Capture Preset
•
Preset Playback
Please note that DMX Personality, DMX Start Address,
Factory Defaults, Lamp On Mode and Presets fields can
also be configured from the menu interface at the back
of the light.
Specifications
Due to continuous improvements and innovations of all
ENTTEC products, specifications and features are subject
to change without notice.
Colour Gamut
