© The Entryphone Company Limited
10
Integrated web site
Finding the PinNet web server
The unit is shipped with a static IP address of 192.168.0.254 with DHCP
1
services disabled.
The unit can be set to behave as a DHCP client by adding a jumper marked ‘LINK TO ENABLE
DHCP’ on the PinNet board. The static IP address can be changed in the unit’s web server interface.
Connect the unit to either a network or directly to a PC (with a crossover cable), launch a web browser
and type in the following address:
http://192.168.0.254
The following screen should appear:
Please note the following when locating the unit’s web server:
•
If connecting directly between the unit and a PC, use a crossover Ethernet cable. Use a normal
Ethernet (CAT5/6) cable if connecting into an existing network or hub/switch.
•
In order to see the unit’s web server located at 192.168.0.254 the IP address of the PC must be in
the 192.168.0.nnn range.
•
If trying to locate the PinNet within your router’s list of connected devices please note that all
PinNet units have a starting Mac
2
address of 00:60:35.
•
Please note that as the screen print above shows, cookies and Javascript must be enabled to use
the PinNet web interface.
1
DHCP (Dynamic Host Control Protocol) is the process whereby the unit will glean an IP address as
well as other details from a DHCP server. Broadband routers often provide DHCP services.
2
Every network (TCP/IP) enabled device has a unique Mac address which identifies that device.
