Rear Indent Module User’s Guide
17
301: RIM not detected
The printer cannot communicate with the RIM.
Power off and restart the printer.
If the error continues:
1.
Power off and unplug the printer and RIM.
2.
Remove the RIM from the printer.
3.
Reconnect the RIM and printer.
4.
Plug in the power cords and restart the printer.
If the error continues, request service.
H
INTS
AND
T
IPS
:
Make sure the power cord is connected into the power supply.
302: RIM arm error
An unexpected error has occurred in the RIM.
Power off and restart the printer.
If the error occurs again, request service.
H
INTS
AND
T
IPS
:
Press the user button to clear the message.
303: RIM wheel error
An unexpected error has occurred in the RIM.
Power off and restart the printer.
If the error occurs again, request service.
H
INTS
AND
T
IPS
:
Press the user button to clear the message.
Summary of Contents for Sigma DS4
