Entrust Sigma DS4, User Manual

Page: 20 / 30

12 About the Rear Indent Module (RIM)
Card Design
Set up your card design using your card production software or another application, such as
Microsoft Word.
Standard indent position is on the right half of the card (starts 1.8" from left side of card).
The RIM can indent characters on either the front or back of the card.
You can fine-tune the settings that control the RIM using Printer Dashboard. Refer to the Printer
Dashboard Help for information about using Printer Dashboard.
Verify Setup
After you set up the indent preferences, print several test cards to determine if the settings meet
your requirements.
When evaluating a card, make sure that:

The indent characters are positioned correctly and have the proper depth.

The indent characters are applied correctly. Look for voids, or faint lines in the indent
characters.
The indent module does not support indenting a card that previously has been
laminated using the CLM laminator.
Standard Indent
Position