Entrust Sigma DS4, User Manual

Page: 16 / 30

8 About the Rear Indent Module (RIM)
Front and Inside
Access Door The access door provides access to RIM supply cassette and
connection latch.
RIM Supply Cassette The supply cassette holds the indent ribbon.
Adapter Plate
The adapter plate allows the RIM to fit against the printer.
Note: The adapter plate may differ from the illustrations in
this guide, depending on the printer model. Any differences in
procedures are described, as needed.
Connection Guideposts
The guideposts connect the RIM to the printer.
Rear Module Data
Connection
The electrical connection for the rear indent module to
connect to the printer.
Note: Avoid touching or jarring the electrical connection.
Damage to the RIM can occur.
Drive Gear The drive gear allows you to move a card out of the RIM if a
card jam occurs. Refer to “Clear a Rear Indent Module Card
Jam” on page 13 .
Connection Latch
Secures the RIM to the printer.
Access Door
RIM Supply
Cassette
Connection
Guideposts
Drive Gear
Rear Module
Data Connection
Connection
Latch
Adapter Plate