Entrust Datacard Retransfer Series, Cleaning Manual, Page: 5 / 13

1
2
3
7
4
5
6
8 527983-001_B
Retransfer Series Printers Cleaning Guide
527983-001_B 9
Multi-Hopper Printer
1. Remove the ink ribbon and retransfer film cartridges. Refer to “Before
You Begin” on page 6 .
2. Open the cleaning card package and remove the isopropanol cleaning
card.
Exception Slide
5. Continue with “Run the Isopropanol Cleaning Card” on page 9 .
Isopropanol
Cleaning Card
3. Pull out the multi-hopper exception slide and insert the cleaning card.
4. Push in the exception slide. Clean the printer immediately. The
cleaning card dries out if it is out of its package for more than a few
minutes.
If the cleaning card appears
bowed, insert it as shown.
Card With Bow
Card Without Bow
Run the Isopropanol Cleaning Card
1. Use the LCD panel to run the isopropanol cleaning card.
When the cleaning cycle completes:
ƒ
If the printer does not have locks: The isopropanol cleaning
card is ejected into the output hopper. Remove and discard
the cleaning card.
ƒ
If the printer has locks: The isopropanol cleaning card is
placed in the printer reject tray (RT1). It can remain in the
reject tray until the next time the tray is emptied.
2. Continue with “Prepare the Printer for Use After Cleaning” on
page 14 .