20
527983-001_B
Retransfer Series Printers
Cleaning Guide
527983-001_B
21
Clean the Rear Fan Filter
The rear fan filter is not present in all printer models.
If your printer includes a rear fan filter, clean the filter every three months.
1. Unlock the printer and open the printer access door.
2.
Press the K3 rear access door release to open the rear access door.
3.
Lift up and remove the filter from the fan mount.
4.
Rinse the filter under running water and shake it gently to remove
excess liquid. Pat it with a paper towel to remove additional water.
5.
Allow the filter to dry completely.
6.
Insert the filter into the fan mount.
7. Close the rear access door.
8. Close the printer access door and lock the printer.
Rear Fan
Filter
Card Handling Information
Use the following information when purchasing and handling card stock:
•
Purchase quality card stock. Excessive burrs, scratches, surface
defects, or contaminates on cards can result in print errors.
•
Grease or oils, such as oils from your fingers, can reduce card quality.
To keep cards completely clean, do not touch the print surface of a
card.
•
Handle blank card stock by the edges only, or wear the card inspection
gloves included in the cleaning kit.
•
Debris or particles on blank card stock can reduce card quality and
damage the system. If you drop a card on the floor, clean it using a
lint-free cloth before using it in the system. Do not use solvents to
clean the card.
•
Avoid contact with the following, as they can cause discoloration or
fading of the cards:
Organic solvents, such as alcohol, film cleaner, or diazo paper.
Soft vinyl chlorides, document cases, pass holders, or erasers.
Hand lotions, hairdressing products, or cosmetics.
•
Avoid storing the cards in locations exposed to direct sunlight, or with
high temperature and high humidity.