background image

E-BI

KE S

YSTEM - E100 S

ERI

ES

E-BI

KE S

YSTEM - E100 S

ERI
ES

6

7

CAUTION

WHILST RIDING

CAUTION

USING THE E-BIKE SYSTEM SAFELY

• Do not give too much of your attention to the cycle computer 

display while riding, otherwise accidents may result.

• If riding a power-assisted bicycle, make sure that you are fully 

familiar with the starting-off characteristics of the bicycle before 

riding it on roads or bike paths. The bicycle can start suddenly, and 

accidents may result.

• Check that the bicycle lights illuminate before riding at night.

• This e-bike system is not intended for use by persons (including 

children) with reduced physical, sensory or mental capabilities, or 

lack of experience and knowledge, unless they have been given 

supervision or instruction concerning use of the appliance by a 

person responsible for their safety. 

• For installation and adjustment of the product, consult a dealer.

• The e-bike system is designed to withstand wet weather riding 

conditions. However, do not deliberately place into, or submerse in 

water.

• Do not clean the e-bike system in a high-pressure hose. 

• Do not turn the bicycle upside down. The display or shifters may 

get damaged.

• Handle the e-bike system carefully, and avoid subjecting it to any 

strong shocks. Do not jump or do tricks on the bicycle

• Although the bicycle still functions as a normal bicycle even when 

the battery is removed, the lights will not function without the 

battery. Be aware that using the bicycle under these conditions will 

be considered non-observance of the road traffic laws in Germany 

and other jurisdictions.

• Always transport the bicycle with the battery connected to the bike

Commute easily with the ENTITY E100 series system. The 

powerful 250W System assists you whilst you pedal - up to 25km/

hr and with a range of up to 50km, all on a single charge.

The Entity E100 series is an EPAC (Electric Pedal Assistance 

Bicycle) system where the motor in the rear hub, provides 

assistance as the rider pedals. There is no throttle, the rider must 

pedal for the power assistance to begin.

It features the latest in e-bike technology including a Samsung 

powered 281Wh smart battery, and a sine-wave controller which 

adds durability and also ensures a smooth, quiet and efficient ride.

The premium LCD display shows you all the important information 

required, including the battery capacity, speed and trip meter. From 

the display you can select one of the 5 levels of pedal assistance 

and there is also a switch for the front and rear lights. Should 

you need it, there is a handy walk assist function - useful whilst 

walking the bike up hills.

The e-bike can provide up to 50km of assisted riding. This will 

depend on many factors including the level of assistance selected, 

but also:

The weight of the rider and luggage

Tyre pressure

Wind resistance 

Temperature

Age of the battery

E100 SYSTEM FEATURES

RANGE

Topography

Maintenance of the bike

Tyre of trail

Amount of traffic

Riding speed.

Summary of Contents for E100 Series















Reviews: